N2NETWORKS : 2013

BASIC ROUTER CONFIGURATION

Take 2 routers in the same model number

Router 0

Double click router 0

Switch off the router

Drag and Place the serial port from the WIC-IT port

Switch on the router

Router 1

Double click router 1

Switch off the router

Drag and Place the serial port from the WIC-IT port

Switch on the router

connect the serial cable for the routers

Double click the router 0

Open the CLI tab

Follow the commands for the router 0

Double click the router 1

Open the CLI tab

Follow the commands for the router 1

Two ports can be enable as indicate by GREEN light

Network id – 192.168.1.0

Serial 1 ip 192.168.1.1

Serial 2 ip 192.168.1.2

Check for send and receive messages as shown in the figure

The total configuration details for the routers

If both the routers can able to send and receive messages it is SUCCESSFUL

If both the routers cannot able to send and receive messages it is IN PROGRESS

N2NETWORKS