BASIC ROUTER CONFIGURATION
Take 2 routers
in the same model number
Router 0
Double click
router 0
Switch off
the router
Drag and
Place the serial port from the WIC-IT port
Switch on
the router
Router 1
Double click
router 1
Switch off
the router
Drag and
Place the serial port from the WIC-IT port
Switch on
the router
connect the serial cable for the routers
Open the CLI tab
Follow the
commands for the router 0
Double click
the router 1
Open the CLI tab
Follow the
commands for the router 1
Two ports
can be enable as indicate by GREEN
light
Serial 1 ip
192.168.1.1
Serial 2 ip
192.168.1.2
Check for
send and receive messages as shown in the figure
The total
configuration details for the routers
If both the
routers can able to send and receive messages it is SUCCESSFUL
If both the
routers cannot able to send and receive messages it is IN PROGRESS
